AMC72-DI dc ampere meter belongs to AMC series programmable intelligent electrical measuring instrument, which can be used for local display, and can also be connected with industrial control equipment to form a measurement and control system. It can have RS485 communication interface and adopt Modbus-RTU protocol.It can also be equipped with analog output, relay alarm output, and digital input/output.
Accuracy Current: Class 0.5 Power Supply AC 220V Current Power consumption < 0.5VA Power supply power consumption≤5VA |  |
 |
|
| Technical Parameter | Value | |
| Input | Rated Value | AC voltage: Single phase AC 100V,400V |
| Three phase AC 100V,400V,660V(UL-L,Only 72/ 96) | ||
| AC current:AC1A,5A; | ||
| DC voltage:1000V,300V,75mV,10V; | ||
| DC current: 0-20mA,4-20mA,5A; | ||
| Overload | Voltage: 1.2 times rated value(continuous); 2 times rated value /1 second | |
| Current:1.2 times rated value(continuous); 10 times rated value /1 second | ||
| Frequency | 45Hz～65Hz | |
| Power Consumption | The power consumption of each voltage, the current input circuit is less than 0.5VA | |
| Accuracy | Class 0.5 | |
| Function | Display | LED or LCD |
| Communication | RS485,Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit,no parity) | |
| Baud Rate 2400/4800/9600/19200 bps etc. | ||
| Alarm | 1 channel passive relay,contact capacity 3A/30VDC,3A/250VAC, Used for high,low,unbalance alarm etc. | |
| Analog | DC4~20mA,( load <500Ω) | |
| (note: Shielded wire is specially selected for the above signal input and output) | ||
| Switching | Input:4 channel or 2-channel dry contact Input, built-in power supply | |
| Output:2 channel switching output, NO relay contact,capacity:3A/30VDC,3A/250VAC | ||
| Auxiliary Supply | AC/DC 85-265V | |
| Power Consumption | <5VA | |
| Insulation resistance | ≥ 100MΩ | |
| Power frequency withstands voltage | Between the power supply set of terminals and signal input, the output set of terminals 2kV/1min (RMS) | |
| Between the shell and all sets of terminals(except the set of terminals reference voltage less than 40V) AC 4kV | ||
| Environment | Temperature | Operation: -10℃～+55℃Storage: -25°C ~+70°C |
| Humidity | ≤95%RH, no condensation, without corrosive gas | |
| Altitude | ≤ 2500m | |
According to different requirements, it can set and control parameters such as transformation ratio, alarm and communication through the buttons on the instrument panel;
It is suitable for occasions that need to detect current in high and low voltage power systems;
When the event recording (SOE) function can be selected, it also has extreme value recording and maximum demand recording.
English
日本語
한국어
français
Deutsch
Español
italiano
русский
português
tiếng việt
Türkçe
العربية
